王明 / Food-Labeling-Management-Platform

<resources>
    <string name="app_name">POSDemo</string>
    <string name="app_title">POSDemo</string>
    <string name="flag_prn">打印机</string>
    <string name="flag_lcd">LCD</string>
    <string name="flag_drawer">钱箱</string>
    <string name="flag_uart">串口</string>
    <string name="flag_magcard">磁卡</string>
    <string name="flag_finger">指纹</string>
    <string name="flag_fm">税控记忆体</string>
    <string name="flag_rtc">RTC</string>
    <string name="flag_sd">SD卡</string>
    <string name="flag_cap">开盖侦测</string>


    <string name="tab_lang">Language</string>
    <string name="tab_printer">Printer</string>
    <string name="tab_magcard">Magcard</string>
    <string name="tab_serialport">Serialport</string>
    <string name="tab_scale">Scale</string>
    <string name="tab_drawer">Drawer</string>
    <string name="tab_lcd">LCD</string>
    <string name="tab_power">Power</string>
    <string name="tab_scanner">Scanner</string>
    <string name="tab_finger">Finger</string>
    <string name="tab_sn">SN</string>
    <string name="operate">操作</string>

    <string name="prn_open">打开</string>
    <string name="prn_close">关闭</string>
    <string name="prn_printbmp">Bmp</string>
    <string name="prn_printesc">ESC</string>
    <string name="prn_printbarcode">Barcode</string>
    <string name="prn_select">选择文件</string>
    <string name="prn_feed">走纸</string>
    <string name="prn_readsn">SN</string>
    <string name="prn_status">状态:</string>
    <string name="prn_nopaper">缺纸</string>
    <string name="prn_havepaper">有纸</string>
    <string name="prn_opt">操作</string>
    <string name="prn_drawer">开钱箱</string>

    <string name="prn_power">读电压</string>

    <string name="mag_open">打开</string>
    <string name="mag_close">关闭</string>
    <string name="mag_read_start">开始读取</string>
    <string name="read_stop">停止读取</string>
    <string name="mag_track1">Track1:</string>
    <string name="mag_track2">Track2:</string>
    <string name="mag_track3">Track3:</string>

    <string name="uart_path">/dev/ttyS2</string>
    <string name="uart_open">打开</string>
    <string name="uart_close">关闭</string>
    <string name="uart_read">开始读取</string>
    <string name="txt_write">写入</string>
    <string name="uart_hex">Hex</string>
    <string name="txt_read_record">读取记录</string>

    <string name="cap_label">开盖侦测</string>
    <string name="txt_read">读取</string>
    <string name="cap_clear">清除</string>
    <string name="cap_upgrade">升级</string>
    <string name="cap_ver">版本</string>
    <string name="cap_read_rtc">读取RTC</string>
    <string name="cap_set_rtc">设置RTC</string>

    <string name="finger_open">打开</string>
    <string name="finger_close">关闭</string>
    <string name="finger_readIds">读取id号</string>
    <string name="finger_cancel">取消</string>
    <string name="finger_isvalid">有效否</string>
    <string name="finger_enroll">注册</string>
    <string name="finger_identify">识别</string>
    <string name="finger_id">ID:</string>
    <string name="finger_cnt">次数:</string>
    <string name="finger_leave">离开:</string>
    <string name="finger_delall">删除所有:</string>
    <string name="finger_delchar">删除单个</string>
    <string name="finger_readnum">读取数量</string>

    <string name="cap_open">打开</string>
    <string name="cap_close">关闭</string>

    <string name="scale_start">Strart</string>
    <string name="scale_close">关闭</string>
    <string name="scale_zero">Zero</string>
    <string name="scale_data">Weight:</string>
    <string name="scale_unlock">UnLock</string>
    <string name="scale_lock">Lock</string>
    <string name="scale_study_zero">StudyZero</string>
    <string name="scale_study_full">StudyFull</string>

    <string name="lcd_open">打开</string>
    <string name="lcd_close">关闭</string>
    <string name="lcd_clear">清除</string>
    <string name="lcd_char">文本</string>
    <string name="lcd_pic">图片</string>
    <string name="lcd_light">背光</string>
    <string name="lcd_off">关</string>
    <string name="lcd_contrast">对比度</string>
    <string name="lcd_qrcode">00020101021230810016A00000067701011201150107536000315080214KB0000002538580320API1683772296164083731690016A00000067701011301030040214KB0000002538580420API16837722961640837530376454033725802TH63045483</string>
    <string name="lcd_scroll">滚动</string>

    <string name="drawer_open">打开</string>
    <string name="drawer_close">关闭</string>
    <string name="drawer_do">动作</string>
    <string name="drawer_status">状态:</string>
    <string name="drawer_st_opened">开</string>
    <string name="drawer_st_closed">关</string>


    <string name="power_value">Voltage</string>
    <string name="power_read">ReadPower</string>

    <string name="play">Play</string>
    <string name="rebootDev">Dev</string>
    <string name="rebootHub">Hub</string>
    <string name="viron">VirOn</string>
    <string name="viroff">VirOff</string>

    <string name="continueprn">连续</string>
    <string name="stopprn">停止</string>

    <string name="fiscal_memory_init">Memory Init</string>
    <string name="fiscal_memory_read">读取</string>
    <string name="fiscal_memory_write">写入</string>
    <string name="fiscal_memory_getcapa">读取容量</string>
    <string name="fiscal_memory_clear">清除</string>

    <string name="fiscal_rtc_read">读取RTC</string>
    <string name="fiscal_rtc_write">设置RTC</string>
    <string name="fiscal_rtc_write_first">第一次校准</string>
    <string name="fiscal_rtc_write_second">第二次校准</string>
    <string name="fiscal_rtc_compare">比对</string>
    <string name="fiscal_rtc_clear">清除</string>
    <string name="fiscal_rtc_printinfo_enable">打印信息</string>
    <string name="fiscal_rtc_printinfo_disable">不打印信息</string>
    <string name="fiscal_memory_status">FM 状态:</string>
    <string name="fiscal_memory_stok">正常</string>
    <string name="fiscal_memory_sterr">异常:</string>

    <string name="sdcard_status">状态: </string>
    <string name="set_passwd">设置密码 </string>
    <string name="lock_sdcard">锁定SD卡 </string>
    <string name="unlock_sdcard">解锁SD卡 </string>
    <string name="clr_passwd">清除密码 </string>

    <string name="lock">锁定SD卡 </string>
    <string name="unlock">解锁SD卡 </string>

    <string name="app_gps">GPS</string>

    <string-array name="lcd_Dev">
        <item>UsbManager</item>
        <item>hidraw</item>
        <item>串口</item>
    </string-array>
    <string-array name="lcd_Type">
        <item>9VFD</item>
        <item>32X144</item>
        <item>65X132</item>
        <item>24X128</item>
        <item>32X240</item>
        <item>32X144_COG</item>
        <item>64X132CD15</item>
        <item>32X144 6+8</item>
        <item>32X144 6+8_COG</item>
        <item>64X132CD16</item>
        <item>32X144_CD17</item>
        <item>160X384_CD18</item>
        <item>160X320_CD19</item>
        <item>NONE</item>
    </string-array>
    <string-array name="device_Type">
        <item>AOBX</item>
        <item>AO4X</item>
        <item>AO5</item>
        <item>AOW</item>
        <item>AOA</item>
        <item>AOW3066</item>
        <item>UNKNOWN</item>
    </string-array>
    <string-array name="printer_Type">
        <item>2inch</item>
        <item>3inch</item>
    </string-array>
    <string-array name="printer_Channel">
        <item>lp</item>
        <item>UsbManager</item>
    </string-array>
    <string-array name="printer_thirdpara">
        <item>NONE</item>
        <item>A8A9</item>
        <item>M3</item>
    </string-array>
    <string-array name="printer_virtual">
        <item>打开</item>
        <item>关闭</item>
    </string-array>
    <string-array name="finger_param">
        <item>0</item>
        <item>1</item>
    </string-array>
    <string-array name="uart_baudrate">
        <item>110</item>
        <item>300</item>
        <item>600</item>
        <item>1200</item>
        <item>2400</item>
        <item>4800</item>
        <item>9600</item>
        <item>19200</item>
        <item>38400</item>
        <item>57600</item>
        <item>115200</item>
        <item>230400</item>
        <item>460800</item>
        <item>500000</item>
        <item>576000</item>
        <item>921600</item>
        <item>1000000</item>
        <item>1152000</item>
        <item>1500000</item>
    </string-array>
    <string-array name="uart_stop">
        <item>1Stopb</item>
        <item>2Stopb</item>
    </string-array>
    <string-array name="uart_size">
        <item>CS5</item>
        <item>CS6</item>
        <item>CS7</item>
        <item>CS8</item>
    </string-array>
    <string-array name="uart_parity">
        <item>None</item>
        <item>Odd</item>
        <item>Even</item>
        <item>Mark</item>
        <item>Space</item>
    </string-array>
    <string-array name="finger_cmd">
        <item>F1 1F E2 2E B6 6B A8 8A 00 07 86 00 00 00 00 02 FB 03</item>
        <item>F1 1F E2 2E B6 6B A8 8A 00 0B 82 00 00 00 00 02 FC 00 00 00 16 EC</item>
    </string-array>

    <string-array name="sys_lang">
        <item>zh_CN</item>
        <item>zh_TW</item>
        <item>en_US</item>
    </string-array>
    <string-array name="lcd_size">
        <item>-1</item>
        <item>10</item>
        <item>11</item>
        <item>12</item>
        <item>13</item>
        <item>14</item>
        <item>15</item>
        <item>16</item>
        <item>17</item>
        <item>18</item>
        <item>19</item>
        <item>20</item>
        <item>21</item>
        <item>22</item>
        <item>23</item>
        <item>24</item>
        <item>25</item>
        <item>26</item>
        <item>27</item>
        <item>28</item>
        <item>29</item>
        <item>30</item>
        <item>31</item>
        <item>32</item>
        <item>33</item>
        <item>34</item>
        <item>35</item>
        <item>36</item>
        <item>37</item>
        <item>38</item>
        <item>39</item>
        <item>40</item>
    </string-array>

    <string-array name="printer_parse">
        <item>黑白图</item>
        <item>灰阶</item>
        <item>Third</item>
    </string-array>
    <string-array name="printer_papertype">
        <item>小票</item>
        <item>标签</item>
    </string-array>

    <string-array name="printer_align">
        <item>左对齐</item>
        <item>居中</item>
        <item>右对齐</item>
    </string-array>
    <string name="title_activity_fingerprint">ActivityFingerprint</string>

    <string-array name="aov_test">
        <item>打印测试</item>
        <item>客显测试</item>
        <item>钱箱测试</item>
        <item>FM写天地</item>
        <item>FM写测试</item>
        <item>复位测试</item>
        <item>FM MCU测试</item>
        <item>格式化SD卡</item>
        <item>循环打印测试</item>
        <item>停止循环打印</item>
        <item>串口测试</item>
        <item>sd卡测试</item>
        <item>打印网络参数</item>
    </string-array>
    <string name="aov_test">测试</string>
    <string name="aov_request">查询</string>
    <string name="upgrade">升级</string>
    <string name="aov_baudrate">波特率</string>

    <string-array name="prn_time">
        <item>1</item>
        <item>2</item>
        <item>3</item>
        <item>4</item>
        <item>5</item>
        <item>6</item>
        <item>7</item>
        <item>8</item>
        <item>9</item>
        <item>10</item>
        <item>15</item>
        <item>20</item>
    </string-array>
    <string-array name="prn_drawer">
        <item>打印不开钱箱</item>
        <item>先开钱箱1后打印</item>
        <item>先开钱箱2后打印</item>
        <item>先开钱箱12后打印</item>
        <item>先打印后开钱箱1</item>
        <item>先打印后开钱箱2</item>
        <item>先打印后开钱箱12</item>
        <item>先开钱箱1后打印再开钱箱1</item>
        <item>先开钱箱2后打印再开钱箱2</item>
        <item>先开钱箱12后打印再开钱箱12</item>
    </string-array>
</resources>